Specialist
Solution
Product
Document
Picture
Special facades
Coloured water and oil repellent for mineral facades
ProtectGuard® Color Mineral Paint: one product, two functions:
1. Coloured renovator for concrete facades
ProtectGuard® Color Mineral Paint is a mineral paint designed to colour and renovate porous mineral facades. Unlike a paint, ProtectGuard® Color Mineral Paint does not interfere with the inorganic nature of the surface. With ProtectGuard® Color Mineral Paint, surfaces remain permeable to air and water vapour. Its opaque finish allows to correctaesthetics of the surface and make it uniform.
2. Water and oil repellent product
ProtectGuard® Color Mineral Paint gives lasting protection against the main causes of deterioration such as dirt, stains of all kinds, atmospheric pollution, greasy dirt, water intrusion, etc. Treated substrates resist penetration by water, oil and dirt. The cleanliness of treated substrates is thus assured. 
ProtectGuard® Color Mineral Paint is used on porous mineral facades and walls.
  • Protects against water, acid rain and grease.
  • Anti-stain, anti-dirt.
  • Excellent adhesion.
  • Flat finish.
  • Allows substrate to breathe and UV-resistant.
  • Concentrate.
  • 5 years efficiency*.
Apply with a short-haired roller (~8 mm) for smooth surfaces.
All tools and equipment should be cleaned with water immediately after use.
  • Mix the concentrate with mechanical action for 3  minutes.
  • Dilution:
1Kg bucket = 250ML of water.
5Kg bucket = 1L of water.
  • Add water slowly and under agitation. Continue to mix  for 5 minutes.
  • Once diluted, product can be used for 7 days. 
  • After 7 days, sedimentation can create a paste that could  be difficult to homogenize. 
  • Mix with mechanical mixer before each use.
  • Apply the product to a surface that is clean, dust-free, grease-free and dry. To remove grease marks and marks of pollution use Guard Cleaner® Eco Soiled Floors or Guard Wash®, and for efflorescence, laitance or concrete bloom use Guard Remover® Eco Efflorescence & Cement.
  • Rinse with copious amounts of water from a high-pressure cleaner and allow to dry before applying ProtectGuard®Color Mineral Paint.
  • The substrate, substrate preparation and product application must comply with the latest French unified codes of building practice 59.1 (Paintwork).
  • Apply in 2 layers.
  • Coverage per layer: 110g/m² (about 1kg for 9m² for one layer).
  • Mix every 30 minutes during application to avoid sedimentation. 
  • Delay between 2 layers: 2 to 24h.
  • Mix the product again before the second layer.
  • Total coverage: about 1 kg for 4.5m².
  • Physical state at 20°C: Liquid.
  • Colour: Coloured.
  • Odour: None.
  • pH: 9.0 ± 0.5.
  • Boiling point [°C]: 100°C.
  • Relative density: 1.30 ± 0.1.
  • Solubility in water [vol/vol]: Total.
  • Flashpoint [°C]: Not applicable.
  • VOCs: < 35 g/Kg*.
Coverage depends on how porous the material is. The following values are for guidance only:
  • After dilution: 220 g/m² that is 1 kg for 4,5 m².
  • 5 Kg of concentrate product = about 27 m².
1 and 5 kg buckets.
  • Store in a dry place at a temperature of between 5°C and 30°C.
  • Shelf-life: 12 months from date of manufacture, in original unopened container.
Domestic stains can be cleaned off with clean water or a pH-neutral cleaner. Do not use high pressure.
  • Only treat dry surfaces from which all atmospheric pollution and all stains have been removed.
  • For ideal application and effective protection, it is essential that ProtectGuard® Color Mineral Paint be used when the temperature of the substrates is between 10°C and 30°C and relative humidity < 5%. pH of substrate ≤ 10.
  • Do not apply in the rain or in very hot or windy weather. Air temperature: between 10°C and 30°C with relative humidity < 80%.
  • Do not treat the substrate if there is a risk of rain (no rain for 48 hrs after application).
  • Do not treat polished, icy or crumbly surfaces or surfaces that have already been treated.
  • Provide protection for nearby surfaces and for the person applying the product.
  • Breathing protection: If applying by hand, no protective equipment is required under normal conditions of use.
  • Hand protection: Wear latex gloves.
  • Skin protection: Wear a regularly washed work garment.
  • Eye protection: Wear protective glasses.
  • In case of ingestion: Do not induce vomiting. Contact a doctor or specialist.
Physical Propeties/Chemical
Aqueous-phase acrylic copolymer with mineral pigments.
Available colours
50 standard colours from the ProtectGuard® Color Mineral Paint colour chart. Flat finish. Customers’ own colours can also be incorporated in the laboratory or on site on demand.

Classification
  • Norm P 84-403 class D2.
  • Norm NF T36-005 Class 7 b2.
GUARD INDUSTRIE (FRANCE)
Daniel Bruyat: Business Director
Phone: (+33) 65 84 46 13 73
Email: daniel.bruyat@guardindustrie.com
Website: www.guardindustrie.com     
 
NANO PHAM GROUP (VIET NAM)
Hotline: (+84) 918 244 844
Email: global@nanophamgroup.com
Website:
 
Important: The content of this documentation is based on our experience with the product. Guard Industry guarantees the quality of its products but expresslydisclaims all liability if the user does not follow the recommendations and conditions of use of the products, especially but not exclusively in the case of faultyapplication, application by untrained personnel, use of products not compatible
with Guard Industry products, or adverse weather conditions For more information, consult the safety data sheet.
Accessing: 66
  • Ho Chi Minh
  • 97 Street No. 7, An Phu- An Khanh Urban Area, An Phu Ward (District 2), Thu Duc City, Ho Chi Minh City
  • Quang Ngai
  • 370 Nguyen Tu Tan Street, Tran Phu Ward, Quang Ngai City, Quang Ngai Province
  • Danang
  • K21/H2/1 Nguyen Van Hue Street, Thanh Khe Tay Ward, Thanh Khe District, Da Nang City
  • Thua Thien Hue
  • B08 The Manor Crown, To Huu Street, Hue City, Thua Thien Hue Province
  • Quang Binh
  • 37 Tran Kinh Street, Dong Hoi City, Quang Binh Province
  • Ha Tinh
  • 64 Le Thai To Street, Ky Thinh Commune, Ky Anh District, Ha Tinh Province
  • Thai Binh
  • 36A Quang Trung Street, Tran Hung Ward, Thai Binh Province
  • Thanh Hoa
  • 597 Street 1, Quang Hung Ward, Thanh Hoa City, Thanh Hoa Province
  • Hanoi
  • 99 Nhat Chieu Street, Nhat Tan Ward, Tay Ho District, Hanoi City
  • Hotline: 0918 244 844
  • Email:global@nanophamgroup.com
Total online: 1.732.717
Home
Search
Member
Contact
Other
  • Login
  • Register
  • Profile
  • Other