Specialist
Solution
Product
Document
Picture
No-rinse biodegradable paint stripper - Gel version
Guard Remover® Eco VG Painted Surfaces is a powerful new-generation stripper designed for stripping paints, varnishes and organic coatings.
Guard Remover® Eco VG Painted Surfaces has been designed to meet the varying requirements of applicators in terms of safety during application, effectiveness, impact on the environment and respect for the surfaces treated.
Guard Remover® Eco VG Painted Surfaces contains no chlorinated solvents, no paraffin, non-harmful product. It does not have the drawbacks of traditional strippers (flammability, hazardous to the user and to the environment...). 
In the form of a viscous liquid, GGuard Remover® Eco VG Painted Surfaces can be applied with a brush. Once applied, it can stand several hours on vertical surfaces without problem (e.g for night work). The fact there is no paraffin, substrates can be cleaned easily without rinsing and then be covered with a new coat of paint or coating.
Guard Remover® Eco VG Painted Surfaces can be used on a large range of substrates (plaster, brick, metal, wood, stone...) and on many paints (acrylic, glycero, polyurethane...). Gel version ideal for vertical surfaces. Can also be applied to horizontal surfaces.
  • Non flammable.
  • Paraffin-free.
  • Ready to use and easy to apply.
  • Odourless, can be applied indoors and outdoors.
  • No need to rinse.
  • Does not alter the substrates.
  • Can be used on a large range of substrates (metal, wood, stone…).
Apply with a roller or natural fibre brush.
Tools and equipment should be cleaned with water immediately after use.
  • Use neat: do not dilute. 
  • Always test on a small hidden portion of the substrate before applying.
  • Shake the product well before use.
  • Apply the product liberally to the surface to be treated.
  • Allow it to act from one up to several hours in order for the coating to fully soften.
  • The product can stay all night and be removed the following morning.
  • Remove all the material with a knife or spatula.
  • Only scrape, no rinsing required.
  • Brush to eliminate the residues with a hard bristle brush (such as scrubbing brush). Do not use a metallic brush.
  • Cleaned surfaces can be covered with a new paint or coating after 24h drying.
  • Physical state at 20°C: Viscous liquid.
  • Colour: Uncoloured.
  • Odour: Slight.
  • pH: Not applicable.
  • Boiling point [°C]: 100°C.
  • Relative density: 1.05 ± 0.01.
  • Solubility in water [vol/vol]: Total.
  • Flashpoint [°C]: Not applicable.
Coverage depends on the number and quality of coats to be stripped. The following values are for guidance only: 1 to 4 m2/kg.
5 Kg.
  • Store in a dry place at a temperature of between 5°C and 30°C.
  • Shelf-life: 48 months from date of manufacture, in original unopened can.
Ecological and respects the environment:
  • Water-based.
  • Chlorinated solvent-free.
  • Safe and non-toxic.
  • Biodegradable > 90%*.
  • VOCs < 85 g/l*.
  • This product can have harmful effects on rubber, plastic slabs. It is therefore necessary to protect these materials.
  • For best results it is essential that Guard Remover®Eco VG Painted Surfaces is used when the temperature of the substrates is between 5°C and 30°C.
  • Do not apply during rain or in very hot weather. Air temperature between 5°C and 30°C.
  • Do not dilute or mix with any other product.
  • Breathing protection: No breathing protection equipment is required under normal use conditions with suitable ventilation.
  • Hand protection: Wear household rubber gloves.
  • Skin protection: Wear protective clothing over exposed areas of skin.
  • Eye protection: Wear protective goggles.
  • In case of ingestion: Do not induce vomiting. Contact a doctor or specialist.
KEEP OUT OF REACH OF CHILDREN
Chemical nature
Mix of solvents, water and emulsifying agents.
GUARD INDUSTRIE (FRANCE)
Daniel Bruyat: Business Director
Phone: (+33) 65 84 46 13 73
Email: daniel.bruyat@guardindustrie.com
Website: www.guardindustrie.com     
 
NANO PHAM GROUP (VIET NAM)
Hotline: (+84) 918 244 844
Email: global@nanophamgroup.com
Website: 
 
Important: The content of this documentation is based on our experience with the product. Guard Industry guarantees the quality of its products but expresslydisclaims all liability if the user does not follow the recommendations and conditions of use of the products, especially but not exclusively in the case of faultyapplication, application by untrained personnel, use of products not compatible
with Guard Industry products, or adverse weather conditions For more information, consult the safety data sheet.
Accessing: 77
  • Ho Chi Minh
  • 97 Street No. 7, An Phu- An Khanh Urban Area, An Phu Ward (District 2), Thu Duc City, Ho Chi Minh City
  • Quang Ngai
  • 370 Nguyen Tu Tan Street, Tran Phu Ward, Quang Ngai City, Quang Ngai Province
  • Danang
  • K21/H2/1 Nguyen Van Hue Street, Thanh Khe Tay Ward, Thanh Khe District, Da Nang City
  • Thua Thien Hue
  • B08 The Manor Crown, To Huu Street, Hue City, Thua Thien Hue Province
  • Quang Binh
  • 37 Tran Kinh Street, Dong Hoi City, Quang Binh Province
  • Ha Tinh
  • 64 Le Thai To Street, Ky Thinh Commune, Ky Anh District, Ha Tinh Province
  • Thai Binh
  • 36A Quang Trung Street, Tran Hung Ward, Thai Binh Province
  • Thanh Hoa
  • 597 Street 1, Quang Hung Ward, Thanh Hoa City, Thanh Hoa Province
  • Hanoi
  • 99 Nhat Chieu Street, Nhat Tan Ward, Tay Ho District, Hanoi City
  • Hotline: 0918 244 844
  • Email:global@nanophamgroup.com
Total online: 150
Home
Search
Member
Contact
Other
  • Login
  • Register
  • Profile
  • Other